2" Wide Slipper Leaf Springs
Medium-duty leaf springs with a rolled eye at one end and a flat slipper end at the other. The slipper end slides into a rear hanger bracket, allowing the spring to lengthen as it flexes - simpler and lower-cost than a shackle setup.
Key Features
2" spring width - medium-duty class
Slipper design - eye at one end, flat slipper at the other
Eye bushing options: 9/16" steel bushing or 5/8" rubber bushing
5 / 6 leaf options - 3,600 to 4,500 lbs capacity
Free length: 27"–30" depending on model
Black painted finish
OEM/ODM available
Product Catalog
| Leaves | Free Length | Eye Type | Capacity per Spring |
|---|---|---|---|
| 5 Leaf Slipper | 27" | 9/16" eye | 3,600 lbs |
| 6 Leaf Slipper | 29.5" | 9/16" eye | 4,000 lbs |
| 6 Leaf Slipper | 30" | 5/8" rubber eye bushing | 4,500 lbs |
Applications
Tandem axle utility trailers
Equipment & car haulers
Small dump trailers
Landscape trailers
FAQ
Q: What is a slipper spring? One end is a rolled eye (mounts to a front hanger); the other end is a flat metal shoe that slides inside a rear hanger bracket as the spring flexes. No shackle strap is needed.
Q: What is the difference between 9/16" and 5/8" eye? It refers to the inner diameter of the eye bushing. Match it to your hanger bolt diameter. The 5/8" rubber bushing is for heavier-duty applications.
Q: Are these for single or tandem axles? Both. They are commonly used on tandem axle trailers paired with a center equalizer and front/rear hangers.
CTA
Send us your free length, eye size, and leaf count - we'll match the right spring.
Hot Tags: 2" wide slipper leaf springs | 3,600–4,500 lbs capacity, China 2" wide slipper leaf springs | 3,600–4,500 lbs capacity manufacturers

